Truth be known in the beginning Red River Lumber Company had three sawmills at Westwood. The first was a portable circular sawmill powered by an old hay threshing machine engine. This mill was assembled in September 1912 and sawed its first piece of lumber on October 1. This mill would provide lumber for construction of Mill B. Mill B would in turn supply lumber for Mill A, the permanent one.
Mill B had a 40,000 board feet daily capacity. The mill was pushed to its limits and it became around the clock operation. Of that output, common grade lumber was utilized to build the town and highest-grade lumber was stored awaiting shipment for when the railroad arrived.
There are discrepancies as to when Mill A was placed into operation. Some accounts have that the first board produced occurred as early as May 1, 1914 and others as August 1. Interestingly, both Mill B (temporary) and Mill A (permanent) were running at the same time. The record is not clear what Red River’s plans were for Mill B. Unfortunately, the issue was resolved when on September 8, 1914, it was destroyed by fire. The fire had originated when sparks ignited the nearby sawdust pile. The fire was fanned by strong winds, which quickly spread to the temporary mill and destroyed it. All efforts were made to contain the fire to the mill, which they succeeded thereby saving the nearby planing mill and lumberyard. While the mill was equipped with automatic sprinklers they malfunctioned during the fire. After the fire, it was discovered there was a piece of wood inside the pipe blocking the flow of water.